Detergent Mart
Ultra Clean 834
Liquid Alkaline Cleaner and Degreaser
Highly Alkaline
Heavy Duty
Ultra Clean 834 is a liquid highly alkaline cleaner/degreaser used in spray washing or parts washers and cleaning systems for heavy-duty general purpose cleaning of most metal surfaces. Ultra Clean 834 Liquid Alkaline Cleaner/Degreaser effectively cleans most soils encountered on metal surfaces. Ultra Clean 834 contains wetting agents to enhance the natural cleaning ability of alkalis.
Not recommended for use on aluminum.
Bath Make-Up:
Recommended 3-5% by volume. For tougher soils, concentration may be increased to 10% by volume.
Operating Data:
Temperature: 100° to 180° F
Time: 1.0 to 3.0 minutes
General Information
-
If additional cleaning power is needed, due to excessive soil conditions, a detergent/wetting agent may be added. Your representative will assist you in making this determination.
-
Whenever a portion of the bath is lost from whatever cause, the working volume should be restored with the same proportion of CLEANER 834 and water as used for a fresh bath.
After Treatment
Following the cleaning stage, the work in process should be rinsed with water-heat as required up to 180° F. and depending on subsequent treatment to be
used. Spray pressure should be 20 to 40 psi.
Equipment
Tank and heating elements, housing, pump, piping, and spray nozzles may be constructed of mild steel. Type 304 stainless steel nozzles are recommended as
they do not corrode, erode, or cavitate, thus giving lifetime performance in both cleaner and rinse stages.
Safety Data
Personnel handling Ultra Clean 834 alkaline cleaner must read and understand any CAUTION label affixed to the shipping container.
The use of face shields or goggles and rubber gloves is recommended. Ultra Clean 834 soap contacting the skin should be washed off with water. If the eyes are involved, flush with copious amounts of water for at least 15 minutes. If any irritation persists, please see a physician.
